A well-placed toilet roll holder is one of those small details that makes a bathroom feel considered and complete. Whether you're fitting one of our oak or walnut wall-mounted holders or a sleek black finish design, this guide walks you through a clean, professional installation. Materials and Tools Needed: Wall toilet roll holder (includes holder, screws, and wall plugs) Offset Screwdriver Drill Level Pencil Measuring tape Hammer (for wall plug) Step-by-Step Guide: 1. Choose the Location: Decide on the ideal location for your toilet roll holder. It should be within easy reach from the toilet but positioned away from water splashes. 2. Measure and Mark: Use a measuring tape to find the desired height. Standard height is typically around 26 inches (66 cm) above the floor. Mark the spot clearly with a pencil. 3. Check for Studs: Use a stud finder to locate wall studs. Mounting on a stud provides the most stability. If the desired location is not on a stud, use wall anchors instead. 4. Levelling: Place a level horizontally at the marked spot to ensure the holder will sit straight. Adjust position as needed before drilling. 5. Install Wall Anchors (if necessary): If not mounting on a stud, drill holes and fit wall anchors following the manufacturer's instructions. 6. Install the Holder: Align the holder's fixing holes with your marked spots. Secure with screws, tightening until the holder is firmly flush against the wall. 7. Double Check Levelling: Once fixed, recheck with your level and make any final adjustments. 8. Test the Holder: Give the holder a firm tug to confirm it is securely mounted before loading with a roll. 9. Final Clean-up: Wipe down the holder and surrounding wall to remove any pencil marks or dust. Your wall-mounted toilet roll holder is now installed. For specific fitting variations, always refer to the instructions included with your NOIR.DESIGN product.
Hinterlasse einen Kommentar
Diese Website ist durch hCaptcha geschützt und es gelten die allgemeinen Geschäftsbedingungen und Datenschutzbestimmungen von hCaptcha.